PGS=0, GBRP=0, GBRSCN=0
A/D Group Scan Priority Control Register
| PGS | Group A priority control setting bit. Note: When the PGS bit is to be set to 1, the ADCSR.ADCS[1:0] bits must be set to 01b (group scan mode). If the bits are set to any other values, proper operation is not guaranteed. 0 (0): Operation is without group A priority control 1 (1): Operation is with group A priority control |
| GBRSCN | Group B Restart Setting (Enabled only when PGS = 1. Reserved when PGS = 0.) 0 (0): Scanning for group B is not restarted after having been discontinued due to group A priority control. 1 (1): Scanning for group B is restarted after having been discontinued due to group A priority control. |
| Reserved | These bits are read as 000000. The write value should be 000000. |
| Reserved | This bit is read as 0. The write value should be 0. |
| Reserved | These bits are read as 000000. The write value should be 000000. |
| GBRP | Group B Single Scan Continuous Start (Enabled only when PGS = 1. Reserved when PGS = 0.) Note: When the GBRP bit has been set to 1, single scan is performed continuously for group B regardless of the setting of the GBRSCN bit. 0 (0): Single scan for group B is not continuously activated. 1 (1): Single scan for group B is continuously activated. |